Search

Manufacturers

High Hazard Magnet

High Hazard Magnet

Class 1, Division 2, Electromagnet, 24VDC, 1200 LB, For Single Door

TA5110-24-H

TA-5110-H

The TA-5110-H electromagnetic lock, has 1200 lbs of holding power.  This special variation of the Thomas magnet  is UL listed for use in Class 1, Division 2 hazardous locations.

 

This unit must be connected to a NEC (National Electric Code, NFPA 70) Class 2 Supply Circuit rated for 24 DC with a current output of 0.25 amperes and output power of 6 watts. Operating temperature for the magnetic lock will not exceed 185° F(85° C). Maximum ambient temperature is not to exceed 104° F(40° C).

For supply connections, use a suitable wire with a minimum insulation temperature rating of 167° F(75° C).

 

 

Specifications

Voltage:     **12VDC or 24VDC

                 **specify when ordering

Current:     .25A @ 24VDC

                 .5A @ 12VDC

Body:         14" x 1-3/4" x 2"

Armature:   10-3/4" x 1-3/4" x 5/8"

D.P.S.:       SPDT, 0.1A @ 30VDC Max

Note: A 2-1/2" Reveal is required to assure rigid mounting of the TA-5110-H Series magnetic lock assembly.


Intended For Use In Atmospheres Containing

  • Acetone
  • Ammonium Hydroxide
  • ATSM fuel C
  • Benzene
  • Methyl-Ethylketone
  • Diethyl-Ether
  • 2-Nitropropane
  • EthylAcetate
  • Furfural, Normal
  • Hexane
  • Methyl Alcohol

 Options

  • Z-Bracket for Pull Side Mount
Power Supply 12/24DC 1AMP
Comes with two 12VDC / 24VDC class 2 rated...
Hazardous Environment Rex Kit
Provides an access control solution for...
Hazardous Environment Rex Kit
Request to exit solution for hazardous...
Quote  
(empty)